Many manufacturers are concerned about understanding the basic working principle and performance parameters of the gear motor, but due to too much information can not read, the gear motor is an electric power transmission device, it is mainly through the combination of reducer and motor to achieve deceleration and torque output.
The following is the basic working principle and performance parameters of gear motors :
1. Working Principle: The working principle of gear motor is to use the power generated by the high-speed rotation of the motor to reduce the rotational speed and increase the output torque through the mutual meshing of gears of the reducer, so as to achieve the required driving force.
2. Performance Parameters: The performance parameters of gear motors mainly include the following points:
a. Input power: It refers to the electric power needed at the input of the gear motor, which determines the driving ability of the motor.
b. Output torque: refers to the torque produced at the output of the gear motor, which is related to the reduction ratio and the rated torque of the motor.
c. Deceleration ratio: It refers to the ratio of the rotational speed of the motor to the rotational speed of the output shaft, which determines the deceleration capacity of the gear motor.
d.Efficiency: It refers to the effective degree of converting electrical energy into mechanical energy of the gear motor, usually above 90%.
e. Working environment: It refers to the ambient temperature, humidity and corrosive conditions applicable to gear motors.
Gear motors are widely used in door locks, automobiles, medical equipment and other industries, according to the specific needs of the selection of the right combination of motor and reducer to meet different drive and control needs.
Shenzhen miniature gear motor motor manufacturer: Guang Dong Lihua Mechatronics Co.,Ltd in the production of custom miniature gear motors for more than 20 years, welcome customers to call us for advice Contact Tel: +8613631599864